How to Make Cosplay Accessories to Save Yourself Big Money --Step by Step Tutorial to Make FGO Gilgamesh Earrings in 10 Minutes

How to Make Cosplay Accessories to Save Yourself Big Money --Step by Step Tutorial to Make FGO Gilgamesh Earrings in 10 Minutes

01 You will need to prepare a piece of 5mm thick PVC, a piece of cardboard, a pencil, a box cutter, an extra glue, a hot air gun, and two DIY ear clips.

02 Draw the earrings on the card paper with a ruler. The final width is a little wider than shown in the drawing, which is 3.5 cm long and 5 cm wide, considering that the drawn plane has to be heated to shape and bend.

03 Cut The pattern with knife or scissors.

1-3 steps to make Gilgamesh earrings

04 I will suggest you place the pattern on a 5 mm thick piece of PVC to draw the shape of the earrings.

05 Repeat and draw another earring.

06 Cut off the shape of the earrings, be careful to keep the knife straight to make sure the edge is nice and clean.

4-6 steps to make Gilgamesh earrings

07 Use 400 Mesh of sandpaper grinding to make the corner round and smooth.

08 Continue to grind until both PVC pieces are rounded

09 This picture shows the difference between grind and not grind.

7-9 steps to make Gilgamesh earrings

10 Grin anther 2 small pieces of PVC.

11 Use a hot gun to bake both sides of PVC. I highly suggest you do not stay in one place for too long.

10-11 steps to make Gilgamesh earrings

12 Better prepare a thick PVC pipe in advance or use other similar objects (such as the family's rolling pin, as long as it is a thick cylinder can be). After doing the last step, put the PVC piece immediately on the thick pipe. Use two hands to gently bend it. Repeat at least 3 times before you can slowly bend PVC, do not think of molding, or with too much strength to make it bend at once. Since the PVC sheets after heated will become soft and hot. And that is not easy to operate, so repeat several times.

  1. Glue the small parts to the big part together.12-13  steps to make Gilgamesh earrings
  1. Glue DIY ear clips together.

15. The last step is using Sanhe brand diamond gold spray to paint both sides 2-3 times with a distance of 20 cm-30cm. I highly suggest leaving a time gap of more than 10 minutes to get the best effect.

 14-15  steps to make Gilgamesh earrings

That’s all the steps to make yourself a pair of amazing earrings. Check Gilgamesh cosplay items at cgarmors NOW.

Welcome to leave comments of a better or fast way to make this earrings. If you have any suggestions to build a better blog post, I'm happy to hear.


Leave a comment